Close
All Categories
    Filters
    Preferences
    Search

    Elk Products M1XEP

    Ethernet Port from Data Bus
    Availability: 5 in stock
    Manufacturer: Elk Products
    SKU: ELK M1XEP

    The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.
    Features:

    • Secure connection with password protection and SSL/TLS encryption
    • Flash Memory for Firmware Updating
    • Event notification via E-Mail (SMTP)
    • Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
    • Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
    • Internet Monitoring and Reporting Capability
    • Network stack supporting the following protocols:
      -TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
    • Federal Information Processing Standards (FIPS) 128 bit encryption
    • Integrated 802.3 compliant 10/100 Mbit network interface
    • RS232, DB9M 9-pin serial port connection
    • Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
    • RJ45 8-pin Network Jack
    • 2.1mm barrel type power connector (center positive)
    • LED Indicators for Power, Link, and Data

    The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.
    Features:

    • Secure connection with password protection and SSL/TLS encryption
    • Flash Memory for Firmware Updating
    • Event notification via E-Mail (SMTP)
    • Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
    • Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
    • Internet Monitoring and Reporting Capability
    • Network stack supporting the following protocols:
      -TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
    • Federal Information Processing Standards (FIPS) 128 bit encryption
    • Integrated 802.3 compliant 10/100 Mbit network interface
    • RS232, DB9M 9-pin serial port connection
    • Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
    • RJ45 8-pin Network Jack
    • 2.1mm barrel type power connector (center positive)
    • LED Indicators for Power, Link, and Data
    Products specifications
    Unit of Measure EACH
    Type Expander
    Style Ethernet
    System Elk M1
    Customers who bought this item also bought

    System Sensor COSMO-2W

    Combo CO/Smoke Detector, 2 Wire
    -48 Available

    System Sensor 5601P

    System Sensor 5601P - 135°F Fixed Temp/Rate-of-Rise, Single-Circuit Mechanical Heat Detector with Plain Housing
    67 Available

    Elk Products M1XIN

    Input Expander, 16 Zone
    4 Available

    Honeywell FG1625RFM

    Glassbreak, Recessed, 25'
    27 Available

    Elk Products M1KP2

    LCD Keypad, Low Profile, 4.658 x 5.5"
    5 Available